You must log in or register to comment.
Quote: “This morning, I asked my Alexa-enabled Bosch coffee machine to make me a coffee. Instead of running my routine, it told me it couldn’t do that. Ever since I upgraded to Alexa Plus, Amazon’s generative-AI-powered voice assistant, it has failed to reliably run my coffee routine, coming up with a different excuse almost every time I ask.”
Why? Seriosly! The author spent XXX kWh energy running AI because is lazy to switch ON damn coffie machine?
AI sucks but a smart home can be actually nice if set up well
I just want my smart home fully or semi fully airlocked on my lan
The real issue with smart home adoption has been proprietary formats all vying for dominance and fragmenting the market. I don’t think AI has changed much.
Matter (and Thread) are a huge change to the SmartHome landscape because they’re open protocols and have well-documented standards - and they’ve finally begun appearing in big manufacturer’s line-ups such as IKEA.
Once their availability spreads I suspect a lot more people will get into running their own local (eg HomeAssistant) smart home because they won’t have to do the ‘ok do I need z-wave or ZigBee or HomeKit or IFTTT or Hue or Tuya or… you know what, fuck this’. It’ll all be the same protocol and communications and config & debug will be much easier.
When you know which xkcd it is before you click it…
There’s an xkcd for everything, isn’t there.
Its not wrong, but the major attraction to Matter is it must allow devices to operate locally (not tying them to cloud services that die every internet outrage, or permanently when the service retires), and it’s an application-layer protocol. Meaning it can operate over WiFi, Ethernet, or Thread.
Many existing smart home hubs have been able to program support for Matter and simply send out an OTA update to add certified Matter support.
I suspect the average smart home is not based on home assistant, but on an ikea hub with their app, or similar.
If you are willing to selfhost a home assistant, then it is not a barrier to add various antennas to it.
So this step to standardization might help mixing different manufacturer products easier. We will see how standard their implementations will be. We had zigbee as shared standard in theory what only worked properly with the manufacturers hub.
For sure. IKEA is a great place to start (or stay), as it’s a cheap ecosystem and their app/implementation doesnt require permanent internet access - functions fine during an internet outrage, and quite privacy-respecting.
HomeAssistant is not anywhere near as hard to set up as it used to be. If you have an old mini-PC retired from work sitting around there are HA images for PCs now, and it’s pretty simple to set up to use your IKEA hub (or whatever you have already), while adding a huge swath of optional features.
I agree it’s still not something your average Joe will set up, but the continual lowering of barriers will get more people into running a self-hosted local config is a great thing for privacy and expanding the hobby.
Most smart homers i have assisted run a ikea hub or similar like Hue and really just want it to be plug and play, after that they find out what happens when the network shut down and can’t access their home. Then they reach out to support people that can install Lan assist.
If anyone wants privacy while maintaing a smart home, then Home Assistant is the solution. Its not adopted widely because it has a learning curve and it needs a bit (or a lot) poking around to make it work. It also has a voice assistant that is not AI powered ( but it could be supplemented by a local LLM if you really want to). A big rabit hole if anyone is interested to go to.
It’s not adopted widely because every single smart home device marketed to normies is infected with cloud bullshit. Go to Home Depot or whatever and look on the shelf: literally every single product will have “Works with Alexa,” “Works with Google Home,” and/or “Works with Apple HomeKit” badges stamped all over the package, but not a single one will mention a damn thing about Home Assistant even when the device actually is compatible. The closest you get is ones that mention “Matter” 'cause it’s at least supposed to be a standard, but it feels like it’s getting slow-walked harder than CableCard sometimes (and if you don’t remember how that worked out, the answer is “not well”).
I would almost call it a conspiracy against openness, but it’s really just the banal result of no rent-seeking leading to no excess profit to plow back into marketing… which is even worse.
Tasmota can help getting rid of the cloud bullshit on most ESP based devices. Of course it requires some tinkering and is not accessible to all users.
The only one i can think about is Aqara there have a home assistant stampel.
Most people don’t find turning the lights off and on burdensome enough to justify a whole lot of effort to avoid.
I’m not anti technology, but it sounds like the author’s desire to use these fancy new toys made their life worse. Congratulations?
Like, if you wanna play music, click the tablet. If you wanna turn on the light, touch the button. It’s so amazingly efficient. Really, three seconds, works every time.
So yeah, you could use voice commands, but those are slower and (obviously, the article explains) highly error prone. In other words, it’s a worse solution than the traditional method.
Of course that’s not always true. Some people can’t walk easily, for example. And some use cases are complicated enough where a single button push doesn’t work. But most of us aren’t in these special situations.
So, you can buy the new toy, but don’t pretend you’re making life better. Be honest: you are either tinkering or bragging. And that’s OK, no worries either way.
You missing theoint of the “real” smart home what would be an automated solution based on environment and not a fancy remote controller to your lights.
Human presence sensors combo with light sensors, and you never have to think about turning lights on or off, and leave the voice assistant for overrides. Temperature sensor aligned with your callendar and weather data make your home warm or cool before you arrive and save on your heating without adjusting.
Call me old fashioned. But when I press the brew button on my coffee machine, it works every time. No internet, apps, or ‘smarts’ required. Just consistent quality.
Coffee machine??? I hand-grind my coffee every morning in a mortar and pestle and then use my Rok to manually press the perfect espresso.
But I also let a self-hosted AI model control the lights and HVAC in my house, cause it does it way better than I ever could manually.
Yeah, me too. But home automation has its usercase: just think about an holiday home where you want to turn on the heating and the boiler the day before you arrive.
Sure, you can ask a local friend to do it for you but being able to do it remotely is nice.I’m also old fashioned and it was always faster for me to reach to light switch than to unlock my phone, find the app and toggle it from there.
or even better yet get a non-electronic coffe maker, just the carafe or a french press.
I use my coffee machine as an alarm. Like a really pleasant morning alarm for the whole house. It’s nice. Works every time.
I don’t even need a timer for the microwave oven. I just rig that shit up where when you close the door, it cooks, and when you open it, well it stops cooking.
Don’t ask why, had to temporarily fix things for my mom. At least we didn’t have kids around the place…
Edit: AI can suck my nugz…
So you just leave it open when you’re not cooking?
Does it not have a light in it?
Remove the light, obviously. Bypass the control circuit…
Geez, didn’t Electroboom teach you anything?
Don’t do these things at home, obviously…
I can’t stand cupboard drawers or microwaves hanging open it would drive me nuts.
We gotta go test these things in the back yard…
Honestly not as dangerous as you might think. Just keep the kids and pets away, and watch your own timer for your frozen pizza…
No, they are still dangerous (if you don’t know what you are doing), because there can still be residual voltage in the capacitors, even when not plugged in. (I am no expert)
